Delta 15-261 15 Inch 6 Speed Drill Press w/Production Table Single Phase Description:

This fine combination of features assures freedom from chatter, long, maintenance-free life and maximum pressure at the drill point. Get the exact speed needed for every drillingjob on any material- 450 to 4700 rpm with a 1725 rpm motor and 300 to 3100 with an 1140 rpm motor. Quick belt tension release is provided by the pivoting motor mounting plate which has a reverse, self-locking taper on the spring loaded, rubber-tipped plunger that quickly restores correct belt tension. Six speeds offer unbelievably wide range of speeds with a low-cost 1725 rpm motor- 425, 600, 1100, 2050, 3900 and 5500 rpm- 11.8 to 1 speed ratio.

Spend $2,500 on Delta tools and accessories and get FREE SHIPPING! Just our way of saying thanks.

Delta 15-261 15 Inch Drill Press Features:

• Extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulley are supported by four over-sized, pre-loaded, lubrcated-for-life ball bearings.
• Massive quill is a full 2" diameter.
• "VS6" has the same excellent construction, PLUS an extra bearing below the spindle pulley.
• Wide, test-proven speed range gives a true 10-to-1 speed ratio.
• Extra-long quill travel gives the extra depth you need for deep-hole jobs like skip and gang drilling... PLUS
• The extra stroke required for clearing jigs and fixtures.
• You can choose an extra-slow speed for drilling very hard materials
• An extra-fast speed for working soft materials or an optimum speed for any size bit material.
• Efficient variable-speed drive lets you select any spindle speed instantly while machine is running.
• A self-locking cam, plus a "snubber" feature, hold speed settings constant under all load conditions.
• Proper belt tension is automatically maintained for full power transmission.

Delta 15-261 Specifications:

• Motor: 3 Phase, 3/4 HP
• Motor Control: 24V Push-Button Station, Magnetic Starter, Transformer and Overload Protection (LVC)
• Speeds: With 1,725 RPM motor: 450 to 4,700 RPM With 1,140 RPM motor: 300 to 3,100 RPM
• Table Size: Standard: 11" x 14" (279 x 356 mm) Production (overall): 15-1/2" x 21-1/2" (394 x 546 mm) Production (inside of collant trough): 12" x 18" (305 x 457 mm) "
• Table Tilt: 90° L and R °
• Column Diameter: 2-3/4"(70 mm) "
• Quill Diameter: 2" (51 mm) "
• Quill Stroke: 6" (152 mm) "
• Key Chuck Capacity: (With Std. Jacobs #33 taper) 1/2" (13 mm) "
• Height: "6 PLUS 6: 71-1/2" (1816 mm) VS6: 74" (1880 mm) "
• Width: Tilting Table: 15-1/2" (394 mm) 21-1/2" (546 mm) "

Delta 15-261 6 Speed Drill Includes:

• Motor and controls
• Belt and pulley guard
• Belt and motor pulley (supplied with 5/8" bore unless 1/2" bore is specified)
• self-locking depth stop
• Depth gage
• Self-ejecting chuck key.