Fein KBM 50QX 2 Inch Capacity Magnet Drill Description:

Fein KBM 50QX 2 Inch Cap Magnet Drill. Most competitive cutters can easily be used with the included adapters. Feins "Quick-In" tooling system allows you to instantly change cutters. FEIN offers a finely tuned core drilling system for metal. Using the FEIN QuickIN rapid change system, you can change bits in just a few seconds. It couldnt be faster or easier. FEIN drills are rated highly, both in the workshop and out on the job site due to the extremely precise holes they produce as well as their sturdy design and their easy handling. The magnetic base is so small that the machines can be used even in the tightest spaces. And with high holding force, you can work above your head - without risking injury.

Fein KBM 50QX Magnet Drill Features:

• QuickIN system for quick and keyless tool release
• Optimal ergonomics due to compact design and light weight
• Strong and accurate dual dove-tail guide
• Infinitely variable stroke range adjustment for fast and safe tool change, without need to remove core drill unit from the work
• Electronic overload cut-out for protection of motor and tool if the drilling pressure is too high
• Magnet monitoring system guarantees long service life of the magnetic coils
• Integral cooling lubricant supply for clean cutting and long tool life 

Fein KBM 32Q Specifications:

• Power Consumption: 700 W
• Voltage: 230V
• Power Output: 450 W
• Full Load Speed: 440 RPM
• Cable w/Plug: 13 ft.
• Drill Steel Max - Core Drill: 7/16 - 1-1/4 in.
• Drill Steel Max - Twist Drill: 1/2 in.
• Drill Steel Max - Tap: 1/2 in.
• Drilling Depth Max: 2 in.
• Chuck QuickIN Magnet Holding Force: 1,980 lbs.
• Height (drill rig): 14-11/16 in.
• Stroke: 5-5/16 in.
• Total Stroke Range: 10-1/4 in.
• Magnetic Base Sizes: 6-5/16 x 3-1/8 in.
• L x H: 10-5/8 x 14-11/16 - 22-7/16 in.

Fein KBM 32Q Includes:

• Carrying Case
• Coolant Pump
• Safety Strap
• Chip Hook
• 3-jaw Gear Chuck
• Chuck Key
• Wrenches
• Arbor Adapter
• Centering Pins
• "Quick-In" Adapters