JET 629004K 16-32Plus 20 amp DRUM SANDER with 608003 Stand.
• No additional residential delivery and lift gate charges on any Jet/Powermatic items!
Spend $2,000 on Jet/Powermatic tools and accessories and get FREE SHIPPING! Just our way of saying thanks.
JET 629004K Drum Sander with 608003 Stand Features:
- Sandsmart™ control continuously monitors the load on the drum motor and automatically regulates the speed of the conveyor motor to maintain the highest feed rate without overload
- Patented conveyor belt TRACKERS™ dramatically reduce the need for manual belt adjustments
- Precision-machined and balanced extruded aluminum drum is self-cooling to protect the surface being sanded from heat-damage
- Sealed and permanently lubricated drum ball bearings for longer life
- Precision-flattened reinforced steel conveyor bed and no-give power feed belt provide a constant smooth sanding action for better results
- Adjustable drum height and downward pressure feature virtually eliminates snipe
- Top-position handwheel adjusts height at 1/16" per turn for precise sanding thickness control
- Patented abrasive take-up fasteners make changing abrasives quick and easy
- Infinitely variable-speed control produces the ultimate finish at a rate from 0 to 10 feet per minute
- On/off switch with overload protection is front-mounted for operator's convenience
- One feed and one drive motor for superior sanding control
- Continuous-duty, 1-1/2HP motor is designed for heavier use for longer periods of time
Jet 629004K Specifications:
- Maximum Board Width (in.): 32 (2 passes)
- Maximum Board Thickness (in.): 3
- Minimum Board Length (in.): 2-1/4
- Minimum Board Thickness (in.): 1/32
- Drum Diameter (in.): 5
- Drum Length (in.): 16
- Drum Speed (RPM): 1720
- Conveyor Speed (SFPM): 0 to 10
- Conveyor Motor: 43 in.-lbs. torque, direct drive, dc
- Dust Port Diameter (OD/in.): 4
- Motor HP: 1-1/2HP
- Motor Phase: 1Ph
- Motor Voltage: 110V
- Drum Bearing Diameter (in.): 1
- Shipping Weight: 145.00 lbs