MK Diamond 167420-36 MK-4036KB 36 Inch 44 HP Kubota Diesel Concrete Saw Diesel Description:

MK Diamond 167420-36 The MK-4000 Electric Saw provides a solution for those environments and situations where electric power is the right choice, whether for indoor use or simply operator preference. The saw utilizes a three-phase, 30 Hp, Baldor electric motor in 230V or 460V to match the user’s need. The saw features the same hydraulic raise/lower system, self-propelled transmission and control set as other MK-4000s. The saw has an on-board battery to provide 12VDC power for raise/lower function when the saw is not plugged in, and has a transformer/battery charger to recharge the system automatically anytime the saw is connected to power. The saw can also be plugged into 120VAC to recharge or maintain the battery when the saw is not in use. An ammeter is provided to help monitor load when cutting.

MK Diamond 167420-36 Kubota Diesel Concrete Saw Diesel Features:

• Quick release, auto latching bayonet mount blade guard
• Enclosed blade shaft with oil bath lubrication system
• Three position adjustable solid steel handle bars
• Blade guard has garden hose style connector for quick disconnecting
• Instrumentation includes engine tach, fuel level and hour meter
• Indicator lights for oil pressure, cylinder head temperature, parking brake, headlight and low battery voltage
• Blade protection system shuts down engine during wet cutting if water pressure drop is detected
• Depth of cut indicator
• Separate valve controls for blade guard and wash down spray head
• Saw designed for left or right side mounting of blade and blade guard
• Blade guard water distribution system designed for optimal blade cooling
• Lifting bail
• Positive depth stop
• Removable rear and side panels for easy service
• 7 3VX V-belt drive from engine to blade shaft
• Electrohydraulic pump raises blade, user adjustable valve for setting blade lowering rate
• Wide front wheel base increases stability and allows ramp loading/unloading
• Eaton model 6 Hydrostatic transmission coupled to an MK differentiating trans-axle
• Differential Lock for cutting on slippery surfaces
• Transmission can be disengaged from axle to allow saw to be pushed manually
• Travel speed 0-220 FPM forward, 0-100 FPM reverse
• Neutral start switch to prevent starting with transmission in gear

MK Diamond 167420-36 Specifications:

• Motor: Kubota (Diesel) water cooled
• Power: V1505-T-E3B
• Blade Capacity: 36"
• Blade RPM: 1,450
• Depth of Cut: 15"

General Specifications

• Arbor: 1" with 3/8" Drive Pin
• Fuel Capacity: 6.75 Gallons
• Travel Speed: 0-220 FPM Forward, 0-100 FPM Reverse
• Starting System: Electric
• Height: 47-1/4" (1,200mm)
• Minimum Saw Length: 64-1/4" (1,632mm)
• Maximum Overall Length: 107-1/2" (2,731mm)
• Handle Extension: 22" (559mm)
• Maximum Pointer Extension: 21-1/4" (540mm)
• Frame Width: 27" (686mm)
• Frame Length: 42" (1,067mm)
• Saw Width: 34-3/4" (863mm)
• Outside to Outside Wheel Width - Front: 17" (432mm)
• Outside to Outside Wheel Width - Rear: 27-1/2" (699mm)
• Blade to Wall: 2-1/4" (57mm)
• Wheel Base Length: 16-1/2" (419mm)
• Maximum Overall Height (Pointer Up): 50" (1,270mm)