MK Diamond 167439-30 MK-4030B 30 Inch 30 HP 480V 3 Ph Baldor Electric Self-Propelled Concrete Saw Description:

MK Diamond 167439-30 The MK-4000 Electric Saw provides a solution for those environments and situations where electric power is the right choice, whether for indoor use or simply operator preference. The saw utilizes a three-phase, 30 Hp, Baldor electric motor in 230V or 460V to match the user’s need. The saw features the same hydraulic raise/lower system, self-propelled transmission and control set as other MK-4000s. The saw has an on-board battery to provide 12VDC power for raise/lower function when the saw is not plugged in, and has a transformer/battery charger to recharge the system automatically anytime the saw is connected to power. The saw can also be plugged into 120VAC to recharge or maintain the battery when the saw is not in use. An ammeter is provided to help monitor load when cutting.

MK Diamond 167439-30 Baldor Electric Self-Propelled Concrete Saw Features:

• Totally enclosed and sealed blade shaft with continuous oil bath lubrication system
• Eaton model 6 Hydrostatic transmission coupled to an MK differentiating trans-axle
• Blade guard allows for right- or left-side mounting for multiple cutting applications
• Blade guard uses "ride on the blade" water tubes for superior water delivery and blade cooling
• Differential lock for cutting on slippery surfaces and free wheel/engage controls to allow the saw to be pushed manually
• Control set provides proprotional blade raising/lowering and travel speed with one hand operation
• Three-position adjustable solid steel handle bars
• Fixed length super rigid front pointer
• 7 3VX V-belt drive from engine to blade shaft
• Travel Speed: 0-220 FPM Forward, 0-100 FPM Reverse

MK Diamond 167439-30 Specifications:

• Motor: Baldor (Electric)
• Power: 30 Hp 480V 3 Phase
• Blade Capacity: 30"
• Blade RPM: 1,770
• Depth of Cut: 12-1/2"

General Specifications

• Switch: IP 65 IEC across the line starter
• Travel Speed: 0-220 FPM Forward, 0-100 FPM Reverse
• Arbor: 1" with 3/8" Drive Pin
• Length: 50" (1,270mm)
• Width: 29" (7370mm)
• Heigh: 42" (1,067mm)
• Handle Extension: 22" (559mm)
• Frame Width: 27" (686mm)
• Frame Length: 42" (1,067mm)
• Outside to Outside Wheel Width - Front: 17" (432mm)
• Outside to Outside Wheel Width - Rear: 27-3/4" (705mm)
• Blade to Wall: 2-1/4" (57mm)
• Wheel Base Length: 16-1/2" (419mm)
• Maximum Overall Height (Pointer Up): 50" (1,270mm)