Powermatic 1120003 PM15 15-Inch 5 Horsepower Planer/Molder, 230-Volt 1 Phase
Description:
The PM15 Planer/Molder from POWERMATIC is loaded with features that make it a standout. A large 5HP motor supports a 15"" wide planing capacity and enough power to run double knife sets for molding. Two feed speeds, 10 and 20 FPM, allow you to operate quickly for maximum stock removal, or more slowly to yield a fine milled finish on decorative moldings.
• No additional residential delivery and lift gate charges on any Jet/Powermatic items!
Spend $2,000 on Jet/Powermatic tools and accessories and get FREE SHIPPING! Just our way of saying thanks.
Powermatic 1120003 Horsepower Planer Features :
- 5HP motor powers through big jobs
- 15" planing capacity is wide enough to run double molding knife sets
- Easy-to-read depth of cut scale with large handwheel for quick set ups
- Two feed speeds provide maximum stock removal or a fine milled finish for decorative moldings
- Feed rollers and cutterhead supported by full cast iron head assembly
- Machine uses single or three piece molding knives, providing a wide selection of profiles
- Hinged top for fast, easy tooling changes
- Fully enclosed base cabinet with integral casters for complete mobility
- Cast iron table is supported by 4 lead screws and height is controlled by chain and sprocket for precise depth of cut
- Two-speed gearbox
- Tool kit
- Dust chute
- Integrated casters
- 3 High speed steel planer knives
- Knife setting gauge
- This machine will use either single molding knives or 3 knife sets
- The hinged top has a 4"" dust collection port, and opens to expose the cutterhead, allowing for fast and easy tooling changes.
- The stand is fully enclosed and equipped with integral casters for shop mobility
Powermatic 1120003 Specifications:
- Working Width (in.): 15
- Maximum Depth of Cut - Planing (in.): 1/8
- Maximum Depth of Cut - Molding (in.): 3/4
- Maximum Planing Thickness (in.): 6-1/2
- Minimum Planing Length (in.): 8
- Cutterhead Diameter (in.): 2-7/8
- Cutterhead Speed (RPM): 4500
- Cuts Per Minute: 13500 planing
- Outfeed Roller Diameter (in): 1-1/2
- Infeed Roller Diameter (in): 1-1/2
- "Feed Rate, Planing (FPM)": 10 and 20
- "Feed Rate, Molding (FPM)": 10 and 20
- Table Size (in.): 27-1/2 x 15-1/8
- Scale/Cursor: inches & millimeters
- Number of Knives: 3
- Table Height Adjustment (in.): 1 Turn = 1/16"
- Dust Port Diameter (OD/in.): 4
- Dust Collection Minimum CFM Required: 900
- Motor HP: 5HP
- Motor Phase: 1Ph
- Motor Voltage: 230V
Powermatic 1120003 Includes :
- Motor with magnetic controls
- Four casters
- Dust hood
- Knife set
- Knife gauge