Powermatic 1352001 3520B 20-Swing 35-Inch between Centers 2 Horsepower Wood Turning Lathe. This unit has an all cast iron headstock, bed and legs that will provide the weight needed in a lathe of this size. Other standard features are spindle lock, brass knockout, ball bearing spindle, drive center, 3" face plate and a 14" toolrest.
• No additional residential delivery and lift gate charges on any Jet/Powermatic items!
Spend $2,500 on Jet/Powermatic tools and accessories and get FREE SHIPPING! Just our way of saying thanks.
Powermatic 1352001 Wood Turning Lathe Features:
- Digital readout allows the user to see the exact RPM that the spindle is turning at for more accurate adjustments and fine tuning
- Redesigned headstock allows for better chisel angles when turning the back side of a bowl against the headstock
- Redesigned tool rest geometry allows for better chisel movement along the tool rest
- Brass tipped knockout bar concentrates the action in the sliding handle; the brass tip will not mar or damage any of the drive centers
- Tool caddy mounts directly to the lathe which allows the user to store all the necessary tools right under the headstock
- Tailstock storage keeps a chip free area to store other often used accessories
- This redesigned 3520B is a turners delight loaded with great features.
- The spindle is a 1 1/4" X 8 TPI and has spindle hole of 5/8", tailstock hole is 3/8"
- There is a tool caddy that mounts to the lathe which allows the user to store all the necessary tools under the headstock.
- The digital readout allows the turner to see the RPM of the spindle to be more accurate in the turning operation
Powermatic 1352001 Specification:
- Distance Between Centers (in.): 34-1/2
- Swing Over Bed (in.): 20
- Overall Length (in.): 50
- Spindle Speeds: 0-1200 / 0-3200 RPM
- Motor: 2HP, 220V
- Lathe Power Requirements: 220V, 3PH or 1PH
- Spindle Thread Size: 1-1/4” x 8 T.P.I.
- Head/Tailstock Taper: #2 Morse
- Height: 44” (Adjustable)
- Tailstock Quill Travel (in.): Over 4
- 3” Faceplate: standard
- 14” Toolrest: standard
- Drive System: Poly V Belt, Inverter Drive
- Spindle Lock: standard
- Knock Out Rod, Brass Tipped: standard
- Drive Center: standard
- Multiple Ball Bearing Line Center: standard
- Hole through Tail Stock Spindle (in.): 3/8
- Hole through Head Stock Spindle (in.): 5/8
- Footprint of stand (in.): 50L x 24W