Baileigh BP-5060NC 220V 3Phase 50 Ton Hydraulic Press Brake. Distance Between Housings is 49 Inch

Baileigh BP-5060NC Hydraulic Press Brake Features:

• Delivers up to 50 tons of pressure.
• Maximum capacity of .118” thick sheet metal across the machine’s full width.
• 5 hp main motor requires 220-volt 3-phase power.

Powerful, Easy-to-Use Hydraulic System

• Runs in 3 modes: jog mode for setup, manual mode for more control over descent and return, and automatic mode for full production.
• 2 encoder-controlled hydraulic cylinders move the top beam.
• Digital readout (DRO) displays the position of the downward stroke, so you can fine-tune a bend and make it right every time.
• It takes a just few seconds to change the top beam pressure and the top position of the stroke (for more or less travel).
• You can set a timer for bend delay to hold the beam down at the bottom of the stroke, so the bend keeps its shape.
• 2 hand wheels let you adjust the position of the beam and back gauge for consistency across the entire width of the beam.
• Foot pedal brings the stroke up and down, leaving your hands free to position the material.
• Motorized back gauge rides on a solid ball screw trolley mechanism.
• Back gauge encoder shows its position on its own DRO.
• Parallel mechanism on the beam synchronizes the top and bottom die to deliver better quality bends across the entire width of the machine.

Rigid Structure and Low Maintenance

• Heavy electrowelded frame, made of solid plate steel, keeps this press brake accurate and running smoothly in production for many years.
• Upper beam rides on a hardened, stabilizing track, coupled together by 3 axes of bearings, to ensure high
• accuracy between both dies at any position of the stroke.
• Includes a set of hardened single-Vee American tooling.
• Accepts standard press brake tooling, giving you a wide variety of options.
• Comes with front material rests (or support arms), which some competing machines do not include.
• 6-light safety curtain helps protect you from injury. This guard stops the machine from running if your hand passes through the light beam.
• 4 grease zerks let you add oil every few months.
• Large hydraulic reservoir on the back allows for convenient fluid changes every 6 to 8 months.

Baileigh BP-5060NC Specifications:

• Item Number: BP-5060NC
• Gauge Length: 17201
• Return Speed: 2.36" / sec.
• Maximum Pressure: 50 tons
• Oil Capacity: 28 gal
• Throat Depth: 7.87"
• Bending Capacity Max Length Max Thickness: 61" / .118"
• Stroke Distance: 5.9"
• Approach Speed: 3.14" / sec.
• Back Gauge Motor: 1/2 hp
• Bending Speed: .275" / sec.
• Main Motor: 5 hp
• Distance Between Housings: 49.21"
• Distance From Table To Ram: 11.81"
• Power: 220V / 3-phase
• Shipping Weight: 6160lbs
• Shipping Dimensions (Inches): 90x63x96