Baileigh STS-16120-CNC 220V 3 Phase 7.5 hp 16 Inch CNC Sliding Table Saw

Baileigh STS-16120-CNC Table Saw Features:

• 7.5 hp motor with 4 speeds: 3,000, 4,000, 5,000, and 6,000 rpm.
• Set the RPM by manually moving the belts to different gears.
• Digital readout (DRO) shows the blade speed to help with repeatability.
• Comes standard with a 12” blade, but accepts up to a huge 16” blade.
• Table wood saw turns on a 1” arbor.
• Runs on 220-volt 3-phase power.
• 1 hp scoring blade spins at 8,000 rpm to ensure a crisp, clean cut. No need to spend extra time on sanding afterwards.

CNC System:

• 5.7” touchscreen control panel has a 300 program memory capacity.
• You can program the cutting width, blade tilt, and blade height of the main saw, as well as the scoring blade height.
• Save cut settings for a given application or schedule (for example, “Monday Cuts”), so they’re the same each time.
• Simply choose your desired cut program, and the system will take the table to the right settings. Then, manually push the wood towards the blade.
• This CNC sliding table saw is also available in 2 non-CNC versions: STS-14120-DRO (with a digital readout) and STS-14120 (without one).

Fences, Table, and Trunnion:

• Includes fences for ripping, crosscut, and angled cuts.
• Servo motor moves the rip fence into place as programmed. No need to read scales. Just dial it in.
• 2-position rip fence can lift out of the way for crosscutting.
• Cast iron frame backs the rip fence, keeping it parallel to the saw.
• Crosscut fence offers 2 DROs (one for the main gantry fence and one for the extension) for repeatability.
• Angle fence is scaled for precision.
• Heavy cast steel trunnion has boxed (not dovetailed) ways for extra rigidity.
• Enormous 15” x 125” sliding table is made of anodized, fully-extruded aluminum, so it’ll stay true and square.
• Table slides on 4 precision shafts made of polished steel for the smoothest slide possible.
• Fully welded base made of 12-gauge steel reduces vibrations, maintains alignment, and keeps cuts accurate.
• Wiper system in the shafts eliminates build-up from sawdust and grease.
• You can slide a whole sheet of 4’ x 8’ material so easily you’d never think there’s weight on it.
• Load lock prevents the table from budging when you’re setting down large sheets of wood.
• 4” main dust port that you can hook up to an extraction system and keep your shop clean.

Recommended for: Industrial production, especially cabinetry manufacturers, lumber liquidators, and railroad yards.

Baileigh STS-16120-CNC Specifications:

• Item Number: STS-16120-CNC
• Shipping Weight: 2810lbs
• Table Size (Length): 126"
• Table Size (Width): 15"
• RPM: 3000/4000/5000/6000
• Belt/Blade Size: 16" Max diameter(** When using a 16" blade, the saw blade will be 1" higher than table when in the lowest position)
• Max Stock Width: 51"
• Table Saw Blade Diameter: 12"
• Table Saw Arbor: 1"
• Table Saw Cutting Height @ 90°: 5" with 16" blade
• Table Saw Cutting Height @ 45°: 3.25" with a 16" blade
• Table Saw Scoring Blade RPM: 8000
• Table Saw Scoring Blade Diameter: 4.5"
• Table Saw Scoring Blade Arbor: 7/8"
• Power: 220V Three Phase
• Horse Power: 7.5
• Weight (lbs): 2500
• Shipping Dimensions (Inches): 91x53x42, 80x16x17, 131x20x17