Big Horn 13200 7 Piece Countersink Drill Bit Set with Stop Collars & Wrench
Big Horn’s Countersink & Counter bore Wood Drill Bit Kit pre-drills holes and countersinks even hardwood and aluminum, thereby reducing the risk of splitting the panel, and giving every screw nail or bolt a nice appearance as it appears flush with the furniture’s surface, and can be covered nicely with wooden plugs.
Great for hinge, Stair book case, coffee table, chair, cabinet, closet, wall, desk, bed, kitchen, bedroom, office, studio, dresser, bench. Countersink may also be used to remove burr left from a drilling/tapping operation thereby improving the finish of the project & removing any hazardous sharp edges.
Both the Countersink bits & the collars have hex nuts for easy adjusting tightening & accurate positioning. Kit comes with the Correct Allen Wrench for tightening the nuts.
Counter Sink Bit Sizes Chart:
|
#5 - 1/8" |
#6 - 9/64" |
#7 - 5/32" |
#8 -11/64" |
#9 - 3/16" |
#10 - 13/64" |
#12 - 7/32" |
|
|
Counter Sink # |
#5 |
#6 |
#7 |
#8 |
#9 |
#10 |
#12 |
|
Counter Sink Dia |
0.365 |
0.365 |
0.365 |
0.365 |
0.37 |
0.43 |
0.5 |
|
Pilot Bit Dia |
1/8" |
9/64" |
5/32" |
11/64" |
3/16" |
13/64" |
7/32" |
This item may qualify for an upto 5% OFF further discount. Check Eligibility.
Features:
- Cuts and clears chips quicker and leaves a smooth countersink. Drill, countersink, and counter bore holes in one easy step. Ideal to use with quick change chucks. Adjustable counter sleeve depth gives you total freedom to adjust as you need based on each project
- Bits are made from hardened high speed steel to endure and last through any job you can throw at it. Bits have sharp tips and are able to sustain heat and pressure without breaking
- Drill Bits are precisely machined to get you the exact hole size in countersinking and counter boring. Each Drill bit is properly labeled and gives you the exact sizing of the hole you are creating.
Specifications:
- 7 Countersink 4-Fluted Bits with 7 Hex adjustable Depth Stop Collars, Compatible with Screw Sizes: #5, 6, 7, 8, 9, 10, 12.
- Bit Sizes: 1/8", 9/64", 5/32", 11/64", 3/16", 13/64", & 7/32"
- Counter Sink Dia: 0.365", 0.365", 0.365", 0.365", 0.37", 0.43", 0.50"
- Allen Wrench: 3/32" Diameter
- Comes in a Blow Molded Case
Applications:
- Works with all types of wood/lumber: Plywood, Pine, Oak, Birch, Mahogany, Maple, Cedar, Fir, Cherry, Poplar, Alder, Ash, Walnut, Hemlock.
| Model# | 13200 |
|---|---|
| Brand | Big Horn |
| CA Prop 65 |
Log In