Promo 1Makita Promo

Dewalt DCK551D1M1 20V 5-TOOL COMBO KIT

This Cordless 5-Tool Combo Kit includes a 1/2 in. Drill/Driver, Reciprocating Saw, 6-1/2 in. Circular Saw, Brushless Oscillating Multi-Tool, 1/4 in. Impact Driver, 20V MAX* 2.0Ah battery, 20V MAX* 4.0Ah battery, charger, and bag. The DCS393 Circular Saw with a 6-1/2 in. carbide blade can cut 2x4s at a 45-degree angle in a single pass. The DCS381 Reciprocating Saw with keyless blade clamp allows for quick blade changes. The DCD771 Drill/Driver has a high-speed transmission with two speeds (0-450 and 1,500 rpm) for a range of fastening and drilling applications. The DCF885 Impact Driver has 3 LEDs with a 20-second delay after the trigger is released for increased visibility.
$599.00
Model# DCK551D1M1
SKU
885911696425

Dewalt DCK551D1M1 Tool Combo Kit Features:

  • DCD771 Cordless Drill/Driver has a high-speed transmission that offers two speeds (0-450 and 1,500 rpm) for a range of fastening and drilling applications
  • DCD771 Cordless Drill/Driver has a high-performance motor that delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
  • DCS885 Cordless Impact Driver has a compact design (5.55 in. front to back) so it can fit into tight areas
  • DCS381 Cordless Reciprocating Saw has a keyless blade clamp for quick blade changes without touching the blade or reciprocating shaft
  • DCS393 Cordless Circular Saw with 6-1/2 in. carbide blade can cut 2x4s at a 45-degree angle in a single pass
  • DCS356 Oscillating Multi-Tool has a 3-speed selector that allows users to choose their speed setting based on application

Dewalt DCK551D1M1 Includes:

  • (1) DCD771 20V MAX* 1/2 in. Cordless Drill/Driver
  • (1) DCF885 20V MAX* 1/4 in. Cordless Impact Driver
  • (1) DCS381 20V MAX* Cordless Reciprocating Saw
  • (1) DCS393 20V MAX* 6-1/2 in. Cordless Circular Saw
  • (1) DCS356 20V MAX* XR® Brushless 3-Speed Cordless Oscillating Multi-Tool
  • (1) DCB203 20V MAX* 2.0Ah Battery
  • (1) DCB204 20V MAX* 4.0Ah Battery
  • (1) DCB112 Charger
  • (1) Kit Bag

Dewalt DCD771 Features:

  • Compact, lightweight design fits into tight areas
  • High performance motor delivers 300 unit watts out (UWO) of power ability completing a wide range of applications
  • High speed transmission delivers two speeds (0-450 & 1,500 rpm) for a range of fastening and drilling applications
  • 1/2" single sleeve ratcheting chuck provides tight bit gripping strength
  • Ergonomic handle delivers comfort and control

Dewalt DCF885 Features:

  • Fits into tight areas with compact (5.55 in. front to back) design
  • Provides visibility without shadows with 3 LEDs with 20-second delay after trigger release
  • One-handed loading 1/4 in. hex chuck accepts 1 in. bit tips
  • Portability with included belt hook

Dewalt DCS381 Features:

  • Voltage: 20 Volts
  • Strokes per minute: 0 to 3,000 SPM
  • Keyless blade clamp
  • 1.125-inch stroke length
  • Electric brake
  • Tool only (no battery, battery charger or case is included)

Dewalt DCS356 Features:

  • The 3-speed selector allows users to choose their speed setting based on application.
  • Brushless motor delivers up to 57% more run time over brushed
  • Dual-grip variable speed trigger gives users ultimate speed and application control
  • Universal accessory adapter for use with most oscillating tool accessory brands
  • Quick-change accessory system allows blades and attachments to be changed quickly without wrenches

Dewalt DCB203 Features:

  • Compact Lithium Ion pack provides up to 33% more capacity than standard 20V MAX* battery packs
  • 3-LED fuel gauge system allows immediate feedback on state of charge
  • No memory and virtually no self-discharge for maximum productivity and less downtime
  • Lightweight design and quick 35-minute charge time

Dewalt DCB204 Features:

  • *Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
  • Premium XR Lithium Ion pack provides up to 33 percent more capacity than standard 20V MAX battery packs
  • 3-LED fuel gauge system allows immediate feedback on state of charge
  • No memory and virtually no self-discharge for maximum productivity and less downtime
  • Weighs 1.42 lbs allowing user maximum run-time in a lightweight battery
  • Compatible with the entire Line of DEWALT 20V MAX Tools

Dewalt DCB112 Features:

  • This DCB112 charges all DEWALT 12V and 21V MAX Li-Ion batteries, tested by manufacturer to match OEM products(Not Original)
  • Input: 100V-240V 47/63Hz 0.8A, Output: 21V 3.0A, our Li-ion battery charger features quick charging and a LED indicator to display charging status: charged, charging, battery too hot or too cold. NOTE: it won't light up(flash) until you have the battery plugged
  • Built-in circuit protection against over heating, short circuit and overloading, together with detection for damaged batteries

Dewalt DCK551D1M1 Specifications:

  • Battery Type: Lithium Ion
  • Case Type: Soft
  • Charger Included: Yes
  • Circular Saw Included: true
  • Drill/Driver Included: true
  • Impact Driver Included: true
  • Number of Batteries Included: 2
  • Number of Tools: 5
  • Power Tool Type: Cordless
  • Reciprocating Saw Included: true
  • System: 20V MAX*

Dewalt DCD771 Specifications:

  • Amp Hour: 1.3
  • Battery Included: true
  • Battery Type: Lithium Ion
  • Case Type: Soft
  • Chuck Size: 1/2"
  • Chuck Type: Keyless
  • Clutch Settings: 16
  • CSA Safety Listing: true
  • Forward and Reverse Switch Included: true
  • Max Power: 300 UWO
  • No Load Speed: 0-450/0-1,800 rpm
  • Number of Batteries Included: 2
  • # of Speed Settings: 2
  • Power Tool Type: Cordless
  • System: 20V MAX*
  • Tool Height: 6.5 in
  • Tool Width: 1.9 in
  • UL Safety Listing: true

Dewalt DCF885 Specifications:

  • Anvil Type: Quick Release
  • Battery Type: Lithium Ion
  • Drive: 1/4" Hex
  • Impacts/Min: 0 - 3,200 ipm
  • Max Torque (ft-lbs): 117 ft-lbs
  • Max Torque (in-lbs): 1400 in-lbs
  • No Load Speed: 0 - 2,800 rpm
  • Power Tool Type: Cordless
  • System: 20V MAX*
  • Tool Length: 5.55 in

Dewalt DCS381 Specifications:

  • Voltage:20V
  • SPM:0 - 3000
  • Stroke Length:1-1/8in
  • Key-less Blade Clamp:Yes
  • Uses Batteries:DCB200, DCB201, DCB203, DCB204, DCB205 (sold separately

Dewalt DCS393 Specifications:

  • Style: Circular Saw
  • Material: Composite
  • Power Source: Battery Powered
  • Voltage: 20 volts
  • Blade Edge: Carbide
  • Speed: 3700 RPM
  • Special Features: Portable, Adjustable Shoe
  • Included Components: Bare-tool
  • Battery Cell Type: Lithium Ion
  • Description Pile: DeWalt 20 Volt Lithium Ion

Dewalt DCS356 Specifications:

  • Material: Composite
  • Voltage: 20 volts
  • Item Package Quantity: 1

Dewalt DCB203 Specifications:

  • Battery Type: Compact
  • NiCad / Lithium: Lithium Ion
  • System: 20V MAX*


Dewalt DCB204 Specifications:

  • Power Source: Battery-powered
  • Horsepower: 4 hp
  • Number Of Pieces: 1
  • Head Style: Flat
  • Measurement System: Metric
  • Included Components: Lith battery
  • Battery Cell Type: Lithium Ion

Dewalt DCB112 Specifications:

  • Package Dimensions: 6.2 x 5.7 x 3 inches
  • Size: DCB112 Charger
  • Material: ABS
  • Voltage: 20 volts
  • Battery Cell Type: Lithium Ion
Model# DCK551D1M1
Brand Dewalt