Promo 1Makita Promo

Dremel 196 High Speed Cutter - 4 Pieces

Dremel 196 - High Speed Cutter.If chattering occurs, increase speed. Secure objects to a stable surface while working.

This provides plenty of shank for the collet or chuck to hold onto. Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure. Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact) TIPS: For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down.
$16.00
Model# 196
SKU
080596035259

Dremel 196 High Speed Cutter Features:

  • Ideal for shaping, hollowing, grooving, slotting, inlaying, and making tapered holes
  • The cylinder shape of the carving bit allows for deep removal of material, and makes stop cuts and v-cuts
  • The accessory tip makes flat bottom slots and grooves, flat side cuts, and v-cuts when held at 45-degrees
  • For use on soft metals, plastics, and woods on flat and curved surfaces

Dremel 196 Specifications :

  • Contents: 2 Bits
  • Description: Carving Bit
  • Bit Diameter mm: 5.6 mm
  • Item #: 196
  • Max. Operating RPM: Do not run in excess of 35,000 RPM
  • Color Code: Teal
  • Overall Length: 1.5
  • Material: High Speed Steel
  • Model Number: 196
  • Bit Diameter Inch: 7/32"
  • Shank Diameter: 0.125
Model# 196
Brand Dremel