Dremel 426 1-1/4 Inch Fiberglass Reinforced Cut-off Wheels - 25 Pieces
Dremel 426 - Fiberglass Reinforced Cut-Off Wheels (1- 1/4" Dia., .045" Thick, 5 per pkg).Secure objects to a stable surface while working.
This provides plenty of shank for the collet or chuck to hold onto. Hold the tool so that the wheel is at a perpendicular angle to the material being cut. Keep a light touch, as the wheel will break under too much pressure. If chattering occurs, increase speed. Plastics require very slow speeds, because they tend to melt at the contact point. TIPS: For best results, insert an accessory bit all the way into the tool and then back it out slightly before tightening down.
This item may qualify for an upto 5% OFF further discount. Check Eligibility.
Dremel 426 Fiberglass Reinforced Cut-Off Wheels Features:
- A cutting disc made of a hard abrasive and reinforced with fiberglass. It is 0.045" (1.2 mm) thick with a diameter of 1-1/4" (32.0 mm).
- Ideal for cutting, grooving and trimming all kinds of metal
- May also be used on other materials-including thin wood, plastics and ceramics
- Cut bolts or screws or make slots in rusted or stripped bolts and screws
- The cut-off wheel cuts only along its edge
Dremel 426 Specifications :
- Diameter: 1-1/4".
- Thickness: 0.045".
- Required Mandrel: #402 Mandrel
- Description: Fiberglass Reinforced Cut-Off Wheel
- Blade Thickness (in): 0.045
- Size: 1.25
- Quantity: 25
- Color Code: Red
- Mandrel: 402
- Kerf: 0.045 "
- Bit Diameter Inch: 1-1/4"
- RPM: 35000
- Thickness: .045"
- Contents: 25 Wheels
- Bit Diameter mm: 31.8 mm
- Blade Thickness: 0.045 "
- Max. Operating RPM: Do not run in excess of 35,000 RPM
- Diameter: 1-1/4" (32 mm)
| Model# | 426 |
|---|---|
| Brand | Dremel |
Log In