Hitachi H65SD3 40 lb 1-1/8 Inch Hex Demolition Hammer
UVP (User Vibration Protection) technology greatly reduces vibration for comfortable extended use and fewer vibration related injuries via the use of internal air cushion between the striker and pistons, as well as dampener rings placed between the nose and the body; along with low vibration handles.
AHB (Aluminum Housing Body) construction significantly enhances the internal and external durability of the tool. Externally the metal body construction is more resistant to jobsite impacts and harsh conditions than plastic counterparts. Internally, incorporating a plastic stator holder around the motor provides the internal double insulation construction that can protect the user from electric shock. The motor and hammer bearings are seated in the metal housing to reduce vibration and stress, and increases stability. During use, the metal keeps the internal gears secure and aligned preventing wear and power loss. Additionally- the metal body dissipates heat better, increasing overall motor life
Hitachi H65SD3 Demolition Hammer Features:
- 33.2 ft/lbs of impact energy - for heavy-duty demolition
- Powerful 10.8 Amp (1,340 W input) motor
- Impressive impact rate of 1,400 BPM for rapid results
- Low vibration levels (full-load vibration level of only 13.9 m/s2) for less fatigue with continuous use
- Elastomer grip reduces vibration transfer, while providing a secure hold for added safety
- Cushioned auxilliary handle that rotates 360 degrees is located between the body of the tool and the bit cylinder to provide optimal control and grip on the tool
- Universal tool retainer accepts 3 types of 1-1/8" hex shank bits; standard hex, collarless retaining groove and air tool bits
- Auto-stop brushes prevent unnecessary maintenance issues
- Large trigger switch with lock-on to increase productivity and reduce fatigue during continuous use
- Sealed lubrication to prevent grease from leaking out and dust from creeping in and damaging the internals
- Impressive power to weight ratio for balanced and comfortable operation
Hitachi H65SD3 Specifications:
- Bit Type: 1-1/8" Hex
- Amps: 10.8
- Impact Energy: 33.2 ft/lbs
- Full Load Impact Rate: 1,400 BPM
- Lubrication: Sealed Grease
- Power Input: 1,240 W
- Bit Types: Collared or Slotted
- Auto-Stop Brushes: Yes
- Handle Type: Shock Absorbing "D" Shaped Side and Trigger Handles
- Vibration (full-load): 13.9 m/s2
- Switch: Two-Finger Trigger w/ Lock-On
- Motor Type: Standard Brushed
- Housing Material: Aluminum
- Warranty: 1-Year
- Weight: 44.3 lbs
Hitachi H65SD3 Includes:
- Plastic Rolling Case (339664)
- Side Handle (Installed)
| Model# | H65SD3 |
|---|---|
| Brand | Hitachi |
Log In