Interstate Pneumatics WRCO2-NC CO2 Cylinder Regulator - Solid Aluminum Body without Belt Clip 125 PSI (for CO2 Cylinders)
Parts List & Schematic:
All metal CO2 Regulators has a 0-125 PSI pressure range with a maximum inlet pressure of 1200 PSI with a safety burst disc rating of 1800 PSI. Fits standards CO2 paint ball cylinders. Comes standard with a pressure gauge, dial regulator knob. The cylinder and regulator are not for oxygen service or use. Solid Aluminum Body.
This item may qualify for an upto 5% OFF further discount. Check Eligibility.
WRCO2 regulator comes installed with a safety relief device (burst disc, CG-1). The Rating of the burst disc is 1800 psi at standard conditions.
This safety device is in addition to the one that comes on the co2 cylinder, which is also a CG-1 burst disc rated at 3000 psi. The paint ball and other co2 cylinders are US DOT Approved cylinders to 3AL specification and are rated at a service pressure of 1800 psi with a safety factor of 2.25 and are required to be hydro-tested at a pressure of 1.5x service pressure every 5 years.
Warning:
Co2 can cause injury (suffocation & Asphyxiation) or death, ventilate the area before entering. Co2 is stored at very high pressure and a liquid Co2 is at cryogenic temperatures which can cause injury, burn, explosion, or death. Co2 should be handled by a trained professional and extreme caution should be taken when dealing with Co2. For safety always wear protective gear.
| Model# | WRCO2-NC |
|---|---|
| Brand | Interstate Pneumatics |
| CA Prop 65 |
Log In