Promo 1Makita Promo

Jet 321147 GH-1640ZX with C80 DRO, Tak & Collet Closer

Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground.

Free Shipping
$41,629.00
Model# 321147
SKU
662755952692

This item may qualify for an upto 5% OFF further discount.  Check Eligibility.

Jet 321147 GH-1640ZX Lathe Features:

  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
  • Chrome molybdenum headstock gears are hardened, ground and shaved
  • Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
  • T-slotted compound slide featuring a four-way tool post
  • One piece cast iron base absorbs vibration allowing heavier cuts
  • Removable gap allows up to 23-5/8" diameter work on 16", 27-1/2" on 18"
  • Five position automatic carriage stop increases productivity
  • Attractive chrome control levers, dials and knobs complete this impressive package

Jet 321147 Specifications:

  • Swing Over Bed (in.): 16
  • Swing Over Cross Slide (in.): 10
  • Swing Through Gap (in.): 25-7/8
  • Length of Gap (in.): 12-1/4
  • Distance Between Centers (in.): 40
  • Spindle Bore (in.): 3-1/8
  • Spindle Mount: Dl-8
  • Spindle Taper (With sleeve): MT-7 (MT-5)
  • Number of Spindle Speeds: 12
  • Range of Spindle Speeds (RPM): 25-1,800
  • Number of Longitudinal and Cross Feeds: 122
  • Range of Longitudinal Feeds (in./rev.): 0.0015 to 0.0913
  • Range of Cross Feeds (in./rev.): 0.0006 to 0.0365
  • Number of Inch Threads: 61
  • Range of Inch Threads: 1-5/8 to 72
  • Number of Metric Threads: 24
  • Range of Metric Threads (mm): 0.05 to 20
  • Maximum Tool Size (in.): 1x1
  • Maximum Compound Slide Travel (in.): 5-1/8
  • Maximum Cross Slide Travel (in.): 9
  • Maximum Carriage Travel (in.): 35
  • Tailstock Spindle Travel (in.): 5
  • Tailstock Taper: MT-4
  • Follow Rest Capacity (in.): 1/2 to 3-1/2
  • Steady Rest Capacity (in.): 3/8 to 7
  • Width of Bed (in.): 13-3/8
  • Prewired: 230V
  • Motor: 7-l/2HP, 3Ph, 230/460V, Prewired 230V
  • Height: 48 inch
  • Width: 40 inch
  • Length: 97.5 inch

Jet 321147 230 V / 460 Volt Lathe Includes:

  • 10" 3 jaw chuck with top reversing jaw
  • 12" 4 jaw chuck
  • 12" face plate
  • Four-way tool post
  • Follow rest
  • Large capacity steady rest
  • Fully integrated coolant system
  • Full length splash guard and coolant return
  • Large easy to use foot brake
  • Articulating halogen work lamp
  • Centrally located controls with job button
  • Threading dial
  • Mounting pads and levelers
  • Spindle sleeve (MT-7 to MT-5)
  • Dead center
  • Live Center
  • Tool box and adjusting tools
Model# 321147
Brand Jet