Jet 321441 GH-1440ZX Lathe with NEWALL C80 DRO and Collet Closer
No reviews
Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces T-slotted compound slide featuring a four-way tool post. Universal gearbox allows inch, metric, diametral, and module pitch threads, no change gears required.
Free Shipping
$34,999.00
Model# 321441
SKU
662755902192
This item may qualify for an upto 5% OFF further discount. Check Eligibility.
Jet 321441 GH-1440ZX Lathe Features:
- Uniquely designed exclusively by JET
- ISO 9001 certified manufacturer
- 3-1/8" bore spindle is supported by two tapered and one ball bearing
- Chrome molybdenum headstock gears are hardened, ground, and shaved
- T-slotted compound slide featuring a four-way tool post
- One-piece cast iron base absorbs vibration allowing heavier cuts
- High quality ANSI Class 50 wear-resistant cast iron bed ways are hardened and ground
- Removable gap allows up to 23-5/8" diameter work
- Five position automatic carriage stop increases productivity
- Attractive chrome control levers, dials, and knobs complete this impressive package
Jet 321441 Specifications:
- Swing over Bed (in.): 14
- Swing over Cross Slide (in.): 7-5/8
- Swing Through Gap (in.): 23-5/8
- Length of Gap (in.): 12-1/4
- Distance Between Centers (in.): 40
- Spindle Bore (in.): 3-1/8
- Spindle Mount: D1-8
- Spindle Taper W/ Sleeve: MT-7 (MT-5)
- Number of Spindle speeds: 12
- Range of Spindle Speeds (RPM): 42 - 1800
- Number of Longitudinal and Cross Feed Rates: 122
- Range of Longitudinal Feeds (IPR): 0.0015 - .0913
- Range of Cross Feeds (IPR): 0.0006 - .0365
- Number of Inch Threads: 61
- Range of Inch Threads (TPI): 1-5/8 - 72
- Number of Metric Threads: 24
- Range of Metric Threads: 0.05 - 20
- Max Tool Size (in.): 1 X 1
- Compound Slide Travel (in.): 5-1/8
- Cross Slide Travel (in.): 9
- Carriage Travel (in.): 35
- Tailstock Spindle Travel (in.): 5
- Taper in Tailstock Spindle: MT-4
- Steady Rest Capacity (in.): 1-2 - 3-1/2
- Follow Rest Capacity (in.): 3/8 - 7
- Width of Bed (in.): 13-3.8
- Motor: 7-1/2 HP, 230/460V, 3 Ph, Prewired 230V
- Prewired: 230V
- Height: 46.875 Inch
- Width: 40 Inch
- Length: 97.5 Inch
Jet 321441 Lathe 230 V / 460 Volt Includes:
- 10" 3-jaw chuck with top reversing jaws
- 12" 4-jaw chuck
- 12" Face plate
- Four-way tool post
- Follow rest
- Large capacity steady rest
- Fully integrated coolant system
- Full length splash guard and coolant return
- Large easy to use foot brake
- Articulating halogen work lamp
- Centrally located controls with jog button
- Threading dial Mountingpads and levelers
- Spindle sleeve (MT-7 to MT-5)
- Dead center
- Live center
- Tool box and adjusting tools
Model# | 321441 |
---|---|
Brand | Jet |
Log In