Jet 321578 GH-1880ZX Lathe With Newall DP700 With Taper Attachment and Collet Closer

Jet 321578 Lathe Features:

• 3-1/8 bore spindle is supported by two tapered and one ball bearings
• Chrome molybdenum headstock gears are hardened, ground and shaved
• Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required
• Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
• T-slotted compound slide featuring four-way tool post
• One piece cast iron base absorbs vibration allowing heavier cuts
• High quality ANSI Class 50 wear resistant cast iron bed ways are
• Removable gap allows large diameter work
• Five position automatic carriage stop increases productivity
• Meehanite Castings
• Siemens Electrics
• STANDARD EQUIPMENT
• 10 3-jaw scroll chuck with top reversing jaws
• 12 face plate
• 5pc. Quick change tool post set
• Follow rest
• Large capacity steady rest with ball bearing tips
• Fully integrated coolant system
• Full length splash guard and coolant return
• Large easy to use foot brake
• Articulating LED work lamp
• Electronic Chuck Key Holder
• Fitted top mats to hold tooling
• Centrally located controls with jog button
• Threading dial
• Mounting pads and levelers
• Live center
• Tolerance Test Certificate
• Tool box and adjusting tools
• E-Stop on Carriage for added safety

Jet 321578 Specifications:

• Number of Longitudinal and Cross Feed Rates: 122
• Number of Metric Threads: 24
• Max Tool Size (In.): 1 x 1
• Drive: SV_1375591258789
• Overall Dimensions (L x W x H) (In.): 136 x 44 x 66
• Swing Through Gap (In.): 27-1/2
• Width of Bed (In.): 13-1/8
• Motor (HP): 7-1/2 HP, 230/460, 3 Ph
• Swing Over Bed (In.): 18
• Cross Slide Travel (In.): 9
• Taper in Tailstock Spindle: MT-5
• Compound Slide Travel (In.): 5-1/8
• Range of Metric Threads: .05 - 20
• Carriage Travel (In.): 74-5/16
• Steady Rest Capacity (In.): 3/8 - 7-3/4
• Number of Inch Threads: 61
• Range of Spindle Speeds (RPM): 25 - 1,800
• Spindle Mount: D1-8
• Follow Rest Capacity (In.): 1/2 - 3-1/2
• Spindle Bore (In.): 3-1/8
• Range of Inch Threads (TPI): 1-5/8 - 72
• Digital Readout: Newall DP700
• Size: 18 x 80
• Spindle Taper with Sleeve: MT-7 (MT-5)
• Swing Over Cross Slide (In.): 11
• Number of Spindle Speeds: 12
• Tailstock Spindle Travel (In.): 5
• Style (Type): Engine - Large Spindle Bore
• Accessory 2: Collet Closer
• Length of Gap (In.): 12
• Range of Cross Feeds (IPR): .0006 - .0365
• Distance Between Centers (In.): 80
• Range of Longitudinal Feeds (IPR): .0015 - .0913