Jet 321597 GH-1880ZX Lathe with 300S DRO and Taper Attachment
No reviews
Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. Removable gap allows up to 23-5/8 Inch diameter work on14 Inch, 25-7/8 Inch on 16 Inch , 27-1/2 Inch on 18 Inch and 29-1/2 Inch on 22 Inch.
Categories: Metal Lathe Machines, Lathes, Lathes, Lathes, Wilton, Lathes, Lathes, Powermatic and Edwards Free Shipping Promo, FLAT 5% OFF
Free Shipping
$42,999.00
Model# 321597
SKU
731325173291
This item may qualify for an upto 5% OFF further discount. Check Eligibility.
Jet 321597 GH-1880ZX Lathe Features:
- Uniquely designed exclusively by JET
- ISO 9001 certified manufacturer
- 3-1/8" bore spindle is supported by two tapered and one ball bearing
- Chrome molybdenum headstock gears are hardened, ground and shaved
- Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
- T-slotted compound slide featuring a four-way tool post
- One piece cast iron base absorbs vibration allowing heavier cuts
- High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground
- Five position automatic carriage stop increases productivity
- Attractive chrome control levers, dials and knobs complete this impressive package
- Swing Over Bed (in.): 18
- Swing Over Cross Slide (in.): 11
- Swing Through Gap (in.): 27-1/2
- Length of Gap (in.): 12-1/4
- Distance Between Centers (in.): 80
- Spindle Bore (in.): 3-1/8
- Spindle Mount: Dl-8
- Spindle Taper (With sleeve): MT-7 (MT-5)
- Number of Spindle Speeds: 12
- Range of Spindle Speeds (RPM): 25-1,800
- Number of Longitudinal and Cross Feeds: 12
- Range of Longitudinal Feeds (in./rev.): 0.0015 to 0.0913
- Range of Cross Feeds (in./rev.): 0.0006 to 0.0365
- Number of Inch Threads: 61
- Range of Inch Threads: 1-5/8 to 72
- Number of Metric Threads: 24
- Range of Metric Threads (mm): 0.05 to 20
- Maximum Tool Size (in.): 1x1
- Compound Slide Travel (in.): 5-1/8
- Cross Slide Travel (in.): 9
- Carriage Travel (in.): 75
- Tailstock Spindle Travel (in.): 5
- Tailstock Taper: MT-5
- Follow Rest Capacity (in.): 1/2 to 3-1/2
- Steady Rest Capacity (in.): 3/8 to 7
- Width of Bed (in.): 13-3/8
- Prewired: 230V
- Motor: 7-l/2HP, 3Ph, 230/460V, Prewired 230V
- Height: 49 inch
- Width: 40 inch
- Length: 136 inch
- 10" 3 jaw chuck with top reversing jaw
- 12" 4 jaw chuck
- 16" face plate
- Four-way tool post
- Follow rest
- Large capacity steady rest
- Fully integrated coolant system
- Full length splash guard and coolant return
- Large easy to use foot brake
- Articulating halogen work lamp
- Centrally located controls with job button
- Threading dial
- Mounting pads and levelers
- Spindle sleeve (MT-7 to MT-5)
- Dead center
- Live Center
- Tool box and adjusting tools
Model# | 321597 |
---|---|
Brand | Jet |
Log In