Promo 1Makita Promo

Jet 321612 GH-220ZX Lathe with 300S DRO and Taper Attachment

Universal gearbox allows inch, metric, diametral and module pitch threads, no change gears required. Removable gap allows up to 23-5/8 Inch diameter work on14 Inch, 25-7/8 Inch on 16 Inch , 27-1/2 Inch on 18 Inch and 29-1/2 Inch on 22 Inch.

Free Shipping
$44,799.00
Model# 321612
SKU
731325173345

This item may qualify for an upto 5% OFF further discount.  Check Eligibility.

Jet 321612 GH-220ZX Lathe Features:
  • Uniquely designed exclusively by JET
  • ISO 9001 certified manufacturer
  • 3-1/8" bore spindle is supported by two tapered and one ball bearing
  • Chrome molybdenum headstock gears are hardened, ground and shaved
  • Carriage features one-shot lubrication and Turcite-B on bed sliding surfaces
  • T-slotted compound slide featuring a four-way tool post
  • One piece cast iron base absorbs vibration allowing heavier cuts
  • High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground
  • Five position automatic carriage stop increases productivity
  • Attractive chrome control levers, dials and knobs complete this impressive package
Jet 321612 Specifications:
  • Swing Over Bed (in.): 22
  • Swing Over Cross Slide (in.): 13
  • Swing Through Gap (in.): 29-1/2
  • Length of Gap (in.): 12-1/4
  • Distance Between Centers (in.): 80
  • Spindle Bore (in.): 3-1/8
  • Spindle Mount: Dl-8
  • Spindle Taper (With sleeve): MT-7 (MT-5)
  • Number of Spindle Speeds: 12
  • Range of Spindle Speeds (RPM): 25-1,800
  • Number of Longitudinal and Cross Feeds: 122
  • Range of Longitudinal Feeds (in./rev.): 0.0015 to 0.0913
  • Range of Cross Feeds (in./rev.): 0.0006 to 0.0365
  • Number of Inch Threads: 61
  • Range of Inch Threads: 1-5/8 - 72
  • Number of Metric Threads: 24
  • Range of Metric Threads: 0.05 - 20
  • Maximum Tool Size (in.): 1x1
  • Compound Slide Travel (in.): 5-1/2
  • Cross Slide Travel (in.): 10
  • Carriage Travel (in.): 75
  • Tailstock Spindle Travel (in.): 5
  • Tailstock Taper: MT-5
  • Follow Rest Capacity (in.): 1/2 to 3-1/2
  • Steady Rest Capacity (in.): 3/8 to 7
  • Width of Bed (in.): 13-3/8
  • Prewired: 230V
  • Motor: 10 HP, 3Ph, 230/460V, Prewired 230V
  • Height: 49 inch
  • Width: 40 inch
  • Length: 136 inch
Jet 321612 230 V / 460 Volt Lathe Includes:
  • 10" 3 jaw chuck with top reversing jaw
  • 12" 4 jaw chuck
  • 16" face plate
  • Four-way tool post
  • Follow rest
  • Large capacity steady rest
  • Fully integrated coolant system
  • Full length splash guard and coolant return
  • Large easy to use foot brake
  • Articulating halogen work lamp
  • Centrally located controls with job button
  • Threading dial
  • Mounting pads and levelers
  • Spindle sleeve (MT-7 to MT-5)
  • Dead center
  • Live Center
  • Tool box and adjusting tools
Model# 321612
Brand Jet