Jet 321892 GH-26120ZH, 4-1/8 Inch Spindle Bore Lathe With 2-Axis ACU-RITE 200S DRO

Jet 321892 Lathe Features:

• 3-1/8" bore spindle is supported by two tapered and one ball bearing
• Universal gearbox allows inch, metric, diametral, and module pitch threads, no change gears required
• One-piece cast iron base absorbs vibration allowing heavier cuts
• Front Removable Chip Tray
• Large easy to use foot brake
• Chrome molybdenum headstock gears are hardened, ground and shaved
• Carriage features one-shot lubrication and Turcite B on bed sliding surfaces
• T-slotted compound slide featuring a four-way tool post
• Removable gap allows up to 25-7/8" diameter work on 16", 27-1/2" on 18"
• Five position automatic carriage stop increases productivity
• Attractive chrome control levers, dials, and knobs complete this impressive package

Jet 321892 Specifications:

• Spindle Bore (In.): 4-1/8
• Digital Readout: ACU-RITE 200S
• Swing Over Bed (In.): 26
• Distance Between Centers (In.): 120
• Swing Through Gap (In.): 34
• Motor (HP): 10
• Swing Over Cross Slide (In.): 16-1/2
• Length of Gap (In.): 8
• Spindle Mount: D1-8
• Spindle Taper with Sleeve: MT-5
• Number of Spindle Speeds: 12
• Range of Spindle Speeds (RPM): 36 - 1,600
• Number of Longitudinal and Cross Feed Rates: 65
• Range of Longitudinal Feeds (IPR): .0023 - .0937
• Range of Cross Feeds (IPR): .0040 - .0404
• Number of Inch Threads: 48
• Range of Inch Threads (TPI): 2-30
• Number of Metric Threads: 22
• Range of Metric Threads: 1 - 14
• Max Tool Size (In.): 1-1/4 x 1-1/4
• Compound Slide Travel (In.): 5-1/2
• Cross Slide Travel (In.): 12-3/32
• Carriage Travel (In.): 108-1/4
• Tailstock Spindle Travel (In.): 6
• Taper in Tailstock Spindle: MT-5
• Steady Rest Capacity (In.): Small 25/32 - 4-29/32, Large 3-15/16 - 9-7/16
• Follow Rest Capacity (In.): 25/32 - 3-15/16
• Width of Bed (In.): 16
• Prewired (V.): 230