Laguna MLC122040-2 PL 12|20 Laser

Laguna MLC122040-2 PL 12|20 Laser Features:

• Automatically adjustable working table to fit odd shaped stock, a rotary attachment, and different tapes of mounts like a bead bed. The lifting height can reach 12”.
• Automatic Focusing
  Autofocusing makes the laser head focus easily and quickly. Other models use a focal spacing block to adjust the focal length by hand. The Bed moves up until the workpiece hits the limit switch, and the focal length is always set at the exact height.
• U.S II-VI Optical Lenses
  II-VI’s broad portfolio of optics is one of the largest and most advanced in the industry, leveraging deep expertise in diamond turning technology, magnetorheological finishing (MRF), and IBS coatings.
• HIWIN HG Linear Guide Rails
  The HG series linear guideways are designed with load capacity and rigidity higher than similar products with circular-arc groove and structure optimization. It features equal load ratings in the radial, reverse radial, and lateral directions, and self-aligning to absorb installation-error. Thus, the HG series linear guideways can achieve a long life with high speed, high accuracy, and smooth linear motion.
• RECI Laser Tube
  Reci Laser tubes are boasting optimal laser output power density, concentrated light beam, uniform light spot, highest working efficiency, and highest cutting speed. Each Reci tube has approximately a 15,000-hour working life.
• Wifi Control allows the operator to work remotely and upload work files to the Laser unit form anywhere – just like a printer.

Laguna MLC122040-2 PL Includes:

• PL12|20 Laser Machine; 12” x 20” work surface, 40-watt CO2 Laser
• Z-axis base; 12” Capacity
• Industrial Water Chiller
• Air Pump
• Exhaust fan Multiple work surfaces; Steel, Honeycomb, bottomless
• Ruida RDWorks Laser Software for Windows
• Expansions Available:
•  Rotary unit
• Mobility stand
• m|flux:5 Fume Collector
• Light Burn Laser Software for Windows or Mac
• New for 2021:
•  Z-axis base; 12” Capacity
•  Autofocus
•  Diffracted Red Dot alignment
•  Improved Under the Hood Access
•  Improved Quality
• What makes the Pl12|20 different from other CO2 Lasers?
•  Precision Components
•  Hiwin Linear Guides & Bearings
•  RECI 40W Laser Tube
•  U.S II-VI Optical Lenses
•  LeadShine Stepper Motor
•  Z-Axis Lift
•  Autofocus
•  Red Dot Refracted Beam for Easy Maintenance
• Wifi Controlled

Laguna MLC122040-2 Specifications:

• Power
• Voltage 115V
• Running Amperage 9.6A (14.4A with all components)
• Recommended breaker
• Dedicated 15A
• Components:
• CO2 Laser
• Laser Tube RECI Water Cooled 40W 15,000H working life
• Optics U.S II-VI Focusing lens & Beam Combiner
• Drive System Leadshine Motors & 3PH Drivers
• Linear Guides Hiwin HG Resin Capped
• Work Envelope 12" x 20"
• Automatic Table Lift 12"
• Control Software RUIDA RDWorks, Lightburn
• Engraving Speed 0-500mm/s
• Cutting Speed 0-500mm/s
• Laser Output Control 0-100% Software controlled
• Exhaust 300CFM
• Working Environment 32º – 104 º F, Humidity 5-95%
• Dimensions
• Assembled Width 40"
• Assembled Depth 30"
• Chiller CW-3000DG
• Voltage 115V
• Hertz 60Hz
• Running Amperage 0.9A
• Chiller Net Weight 21 Lbs
• Chiller Ship Weight 26 Lbs
• Tank Capacity: 9L (2.3 Gal)
• Flow: 10L/min (2.64 Gal/min)
• Air pump
• Voltage 115V
• Running Amperage 1.3A
• Air Flow 5 CFM
• Net Weight 9.9 Lbs
• Ship Weight 10 Lbs
• Exhaust Fan
• Voltage 115V
• Running Amperage 2.6A
• Horse Power 1/3HP
• Air Flow 300CFM
• Assembled Height:
• 10" / 27" / 40" (top unit, with base, with base and stand)
• Width: 40", Depth: 30"

Shipping Dimensions:

• W42xD34xH31
• Net Weight 300 Lbs (all components)
• Ship Weight 325 Lbs