Laguna Tools MJOIN8020-0130 8 Inch Parallelogram Jointer Sheartec Ii
The Laguna ShearTec II is at the cutting edge of Spiral Cutter head technology today. Jack-screw arrangement allows easy replacement and adjustment of individual knives. In the event the entire cutter-head has to be removed, a new module can be fitted in place without production down-time. The extra-long table provides a full 83” of work support. Deep gullets allow chips to exit fast & keep the head clean. The inserts are made from thicker solid German carbide & set into the head on a flat surface rather than a cone design. This allows more torque to be used when tightening the inserts. All of the inserts are slightly angled to give a shear type cut with low impact & less kick-back action. The leading edge is crowned to minimize lines appearing. Laguna ShearTec II heads are all 6 row; most competitors’ heads offer just 3 or 4 rows. There obviously are a host of benefits associated from the additional rows: More carbide inserts, longer life, less noise and vibration, less kick-back & smoother finish.
Laguna Tools MJOIN8020-0130 Jointer Features:
- Modular cutterhead provides a consistently clean cut
- Cast-iron assures less vibration
- Cabinet stand completely encases motor and pulleys to protect from dust and shavings
- Solid German carbide inserts
- 5200 rpm Spiral cutter head
- 3HP motor
Laguna Tools MJOIN8020-0130 Specifications:
- Bench or Stationary: Stationary
- Blade Count: 54
- Blade Height (in): .5
- Caster Platform Included: Yes
- Cord Length (ft): 6
- Country of Origin: USA
- Cutter Head Type: Spiral
- Drive Motor System: 3 HP, 220 Volt, 1 Phase, TEFC
- ETL Listed: No
- Electrical Cord Configuration: Nema 6-20
- Fence Height (in): 4.75
- Fence Length (in): 40
- Fence Tilt: Yes
- Fence Tilt Range: 90° & 45° with Positive Stop
- Fence Type: Cast Iron Machined
- Helical Cutter Head: No
- Integrated Rabbeting Edge: Yes
- Jointer Design: Benchtop
- Lowest Operational Speed (rpm): 5000
Model# | MJOIN8020-0130 |
---|---|
Brand | Laguna Tools |
Log In