Laguna Tools SUPMX-913002 25x2 Double Drum Sander
Sand two grits in a single pass with a 25×2 Double Drum Sander. Featuring INTELLISAND Technology and a 5 HP motor, you can significantly reduce the amount of time you spend sanding.
The 25×2 Double Drum Sander features INTELLISAND Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor. Available in Single and 3 Phase power.
Category: Sanders
Free Shipping
$4,118.97
Model# SUPMX-913002
SKU
818047019127
Features of the 25×2 Double Drum Sander include:
- INTELLISAND Technology: Automatically adjusts conveyor speed based on load
- Prevents gouging, damaging or burning stock
- Provides consistent finish even with varying grain pattern and density
- Greatly increases abrasive planing and dimensioning speed
- Flatness Guarantee: Precision-flattened steel conveyor bed reinforced with four steel cross sections for no “flex” in conveyor, guaranteeing flatness to less than .010″ across the width of the sander
- Abrasive conveyor belt offers the best grip for raw wood, giving you the ability to accommodate stock that is much shorter or thinner
- Patented Abrasive Attachment System effectively tensions the abrasive wraps, preventing loose abrasive and overlap
- Easiest access to abrasive fastening system of any drum sander! Machine design includes additional space around abrasive, eliminating the need for special tools.
- Self-cooling drum prevents overheating and extends abrasive life
- Drum ball bearing are sealed and permanently lubricated
- Cast stand, zinc-plate steel bed, center-less ground column tubes
Laguna Tools SUPMX-913002 Specifications:
- Maximum Width (in): 25, 37, 50
- Minimum Length (in): 3-1/2
- Maximum Thickness (in): 25″ model: 6
- 37″ & 50″ models: 12
- Minimum Thickness (in): 1/32
- Dimensions HxWxD (in):25″ model: 43 x 46 x 31
- 37″ model: 43 x 58 x 31
- 50″ model: 50 x 71 x 31
- Drum (in): (extruded aluminum)25″ model: 5 x 25
- 37″ model: 5 x 37
- 50″ model: 5 x 50
- Drum speed:1740 RPM
- Dust Hood: (Steel hood, hinged at back25” model: one (2) 4” vacuum port, min. 1000 CFM recommended
- 37″ & 50″ models: (3) – 4″ vacuum ports, min. 1800 CFM recommended
- Ball bearings (1”):4, sealed and permanently lubricated
- Conveyor Motor:25″ & 37″ models: 100 in. -lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM
- 50″ model: 220 in.-lb. torque, direct drive D.C motor, ranged variable, 0-15 FPM
- Drive Motor (TEFC):25″ & 37″ models: 5 HP
- 50″ model: 7-1/2 H
- Power Requirements:208-230V, 60HZ; 1 Ph, 30 amp service; 3 Ph 20 amp service
- Shipping Weight (lbs):25″ model: 475
- 37″ model: 525
- 50″ model: 820
Model# | SUPMX-913002 |
---|---|
Brand | Laguna Tools |
Log In