Makita HR4013C 1-9/16 Inch Advanced AVT Rotary Hammer, Accepts SDS-MAX Bits (Replacement of HR4010C)

Makita HR4013C Rotary Hammer Features:

• Powerful 11 AMP motor delivers 8.4 ft.lbs. / 11.4 J. of impact energy to handle the most demanding applications
• Advanced Anti-Vibration Technology (AVT®) is a synchronized, three-component system that more effectively reduces vibration resulting in a low 5m/s2
• Advanced AVT® includes an air actuated counterbalance that directs air pressure from the crank and barrel room into the counterbalance
• cylinders to move counterweight pistons in the opposite direction of the hammer mechanism to effectively reduce vibration
• Advanced AVT® includes a vibration absorbing housing with a spring loaded back handle and housing which moves independently of the motor and hammer mechanism effectively isolating more vibration away from the user
• Advanced AVT® includes an integrated damper spring at the base of the impact bolt engineered to absorb impact vibrations from the drill bit
• Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
• Soft start suppresses start-up reaction for more control and better accuracy
• "No hammering when idling" function automatically reduces the speed of the motor which helps increase tool life and performance
• Variable speed control dial enables user to match the speed to the application for greater versatility
• Torque limiting clutch engineered to prevent gear damage by automatically disengaging gears if the bit binds
• Sequential impact timing delivers timed hammering during rotation to minimize overlapping bit impacts for up to 50% faster drilling
• L.E.D. power light indicates switch failure or cord damage
• L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced
• Automatic brush cut-off protects commutator from damage for longer tool life
• 2-mode operation for "Chipping Only" or "Hammering with Rotation"
• Lock-on or trigger activation in "Chipping Only" mode with a push button start/stop control for more convenient operation
• 24 bit angle settings allow the bit to be set at different positions for operating convenience
• One-touch sliding chuck for quick bit changes
• Includes a 16.4 ft. power cord for user convenience

Makita HR4013C Specifications:

• AMPS: 11
• Capacity (concrete drilling): 1-9/16"
• Capacity (concrete drilling w/ core bit): 4-1/8"
• Impact Energy (Joules): 11.4 J
• Impact Energy (ft.lbs.): 8.4 ft.lbs.
• Vibration (m/s²): 5
• Blows Per Minute (variable speed): 1,450 - 2,900 BPM
• No Load Speed (variable speed): 250 - 500 RPM
• Overall Length: 18-11/16"
• Cord Length (ft): 15.6'
• Net Weight: 15.1 lbs.
• Shipping Weight: 27.8 lbs.
• Bit Type: Accepts SDS-MAX

Makita HR4013C Includes:

• (1) D-Handle Assembly, HR4013C (196792-8)
• (1) DEPTH ROD, HR4013C (331955-1)
• (1) Side Handle Assembly (123138-5)
• (1) Hammer Bit Grease (194683-7)
• (1) CLOTH F/WIPING OIL (443122-7)