Makita HR4510C 1 3/4 Inch Rotary Hammer with Anti-Vibration Technology
Makita HR4510C 1 3/4 Inch Rotary Hammer with Anti-Vibration Technology. The 1 3/4" Anti-Vibration Rotary Hammer (HR4510C) from Makita merges extreme power with precision control and user comfort. The 13.5 AMP motor puts out a massive 1,250-2,750 BPM. The RPM are synchronized with the BPM in order to prevent overlapping impacts - yielding up to 50% more efficient drilling. The user can operate the variable speed control and the 2-mode operation to select between "Hammering with Rotation" and "Hammering Only" in order to get the best performance for the job. The Anti-Vibration Technology (AVT) dynamic vibration absorber ensures extra-low vibration performance and lower strain on the user.
This item may qualify for an upto 10% OFF further discount. Check Eligibility.
- Powerful 13.5 AMP motor
- 1,250-2,750 BPM to handle the most demanding jobs
- Built-in Torque Limiter ensures stable torque control
- Anti-Vibration Technology (AVT) active dynamic vibration absorber ensures extra-low vibration performance and lower strain on the user
- Synchronized RPM and BPM prevents overlapping impacts for up to 50% more efficient drilling
- 2-mode operation "Hammering with Rotation" and "Hammering Only" for a wide variety of applications
- Electronic variable speed control allows user to set the speed based on the application
- Speed control reduces speed loss when working in heavy applications and ensures maximum productivity
- 16 chisel angle settings allow user to adjust based on the application
- Extended service life of carbon brushes is more than twice that of competitive models
- One touch sliding chuck for easy bit installation and removal
- Capacity Concrete: 1.75 inches
- Capacity with Core Bit: 5 inches
- Impact Energy: 12.5 J
- No Load Speed: 130 - 280 RPM
- Blows per Minute: 1,250 - 2,750 (BPM)
- AMPS: 13.5
- But Type: SDS-Max shank
- Length: 18 inches
- One (1) 1-3/4" Rotary Hammer
- One (1) Side Handle
- One (1) D-Handle
- One (1) Depth Gauge
- One (1) Grease
- One (1) Plastic Carrying Case
- Drilling holes into concrete up to 5" thick
Model# | HR4510C |
---|---|
Brand | Makita |
Log In