Makita XT274PTX 18V X2 (36V) LXT® Lithium‑Ion Cordless 2‑Pc. Combo Kit (5.0Ah) and Brushless Angle Grinder
Landscapers are seeking more cordless alternatives to gas-powered outdoor power equipment, and Makita is meeting demand with an expanding line of cordless OPE. The XT274PTX packs two cordless solutions for cutting and clean-ups – but with zero emissions, lower noise and considerably less maintenance. The 18V X2 LXT® (36V) Blower and Chain Saw are both powered by two 18V batteries for maximum power and run time, but without leaving the strongly-preferred 18V battery platform. The combo kit includes two fast-charging 18V LXT 5.0Ah Lithium-Ion batteries and an efficient 18V Dual Port Rapid Optimum Charger.
The Chain Saw has a 12” guide bar and a Makita-built motor with 1,650 FPM. The Blower has an efficient brushless motor that moves a high volume of air with up to 473 CFM and a maximum air velocity of 120 MPH. Both have zero emissions and reduced maintenance with no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. Both feature Makita Extreme Protection Technology (XPT™), a protective seal inside the tool engineered for improved operation in harsh conditions by channeling water and dust from key internal components.
Makita XT274PTX Combo Kit Features:
- Blower with BL™ Brushless motor delivers up to 120 MPH air velocity and 473 CFM of air volume
- Sound pressure rating of 60.2 dB(A); measured per ANSI B 175.2
- 6-stage air velocity/volume selection dial with variable speed control trigger
- Compact and ergonomic design at only 38-3/4” long
- Weighs only 9.9 lbs. with batteries for reduced operator fatigue
- Chain Saw features a Makita-built motor that delivers 1,650 FPM chain speed for faster cutting
- Low noise level at only 89 dB(A) and zero emissions for operator comfort
- 12" guide bar for increased capacity
- "Tool-less" chain adjustment for convenient operation and maintenance
- Front hand guard actuates chain brake when engaged
- Cordless for reduced maintenance; no need to change engine oil or spark plug, clean air filter or drain fuel for storage
- Weighs only 10.1 lbs. with batteries for reduced operator fatigue
- Two 18V LXT® Lithium-Ion batteries deliver the power and run time for gas powered demands without leaving the 18V LXT® platform
- Feature Extreme Protection Technology (XPT™) which is engineered to provide increased dust and water resistance in harsh job site conditions
- 18V LXT® Lithium-Ion 5.0Ah battery BL1850B features an integrated L.E.D. battery charge level indicator
- 18V LXT® Lithium-Ion 5.0Ah battery BL1850B provides up to 65% more run time per charge compared to 3.0Ah battery BL1830
- 18V LXT® Lithium-Ion 5.0Ah battery BL1850B reaches a full charge in 45 minutes or less
- Dual Port Charger charges two (2) 18V LXT® Lithium-Ion 5.0Ah batteries in only 45 minutes
- Dual Port Charger features a built-in USB port for charging portable electronic devices
- The Makita Rapid Optimum Charger communicates with the battery’s built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
- Built-in fan circulates air through the battery during the charging process to cool the battery for faster charge time.
- 3-year limited warranty on tool, battery and charger
- Only use genuine Makita batteries and chargers
Makita XT274PTX Specifications:
- Tool Count: 3
- Voltage: 36V
- Battery: 2X 18V LXT® Lithium-Ion
- Battery Charge Time (minutes): 45
Makita XT274PTX Includes:
- (1) 18V X2 (36V) LXT® Brushless Blower (XBU02Z)
- (1) 18V X2 (36V) LXT® 12" Chain Saw (XCU02Z)
- (2) 18V LXT® Lithium-Ion 5.0Ah Battery (BL1850B)
- (1) 18V LXT® Lithium-Ion Dual Port Charger (DC18RD)
- (1) 18V LXT® Brushless Angle Grinder
| Model# | XT274PTX |
|---|---|
| Brand | Makita |
Log In