Metabo C3610DRJQ4M 36V MV Brushless 10 Inch Table Saw with soft start, bare tool
The 36 Volt MultiVolt™ Cordless Table Saw is part of the MultiVolt power tool platform that offers the power of a corded tool, the freedom of a cordless platform and the choice to operate all MultiVolt tools with a battery OR plug into an outlet. It's Cordless, It's Corded, It's BOTH.
Metabo HPT introduces a revolutionary cordless-corded power tool solution that meets the power output demands on a jobsite. The MultiVolt cordless circular saw accepts a 36V battery OR plugs into an outlet with the AC Adapter. This unique platform changes what's possible on the jobsite by offering the power of a corded circular saw, the freedom of a cordless circular saw and the choice to operate all MultiVolt tools cordless OR corded.
Metabo HPT C3610DRJQ4M Table Saw Features:
- AC/DC convenience meaning the tool can be powered by a MultiVolt battery OR the MultiVolt AC Adapter (both sold separately)
- Features Brushless motor technology for more runtime, increased power and extended durability with essentially no maintenance
- 36V DC Brushless motor produces 5.000 RPM to power through the toughest ripping applications
- Soft start function reduces noise and recoil at start-up
- Electric brake halts the rotation of the blade within seconds for added safety
- 10" 40-Tooth carbide tipped blade included for high cutting capacity
- Bevel range of 0 degree to 45 degrees for cuts ranging from 3-1/8" (at 0 degree) to 2-1/4" (at 45 degrees)
- 28-3/4" x 22" working table top with out feed support of 28-3/4" x 2" for easy and stable material support
- Telescoping table extension supports 35" of ripping capacity to the right and 22" to the left
- Both the bevel scale and bevel height adjustment knobs for the blade are situated on the front of the cabinet for easy access and viewing
- Equipped with a 3/4" T-slot miter gauge that features a large scale with adjustable positive stops at 0, 15, 30,
- 45 and 60 degrees to the left and right to help guide material accurately for a truer cut
- On-tool accessory storage allows for easy access to needed items and convenient storage while not in use
- 8 x 13/16" Dado capacity allows for simple dado cuts
- Easy adjustments for blade height or angle, as well as simple fence adjustments to adhere to the cutting material
- Overload protection automatically shuts off the motor in a possible current overload situation to help prevent damage to the saw
- Riving knife ensures cutting material does not bind and/or kick-back during operation
- Oversized power switch with emergency off safety cover is designed at knee level for immediate shut down as an added safety feature
- Dust port located at the rear of the base measures 2-1/2" and can connect to a shop vac or dust collection system for a cleaner work environment
- Weighs 67.3 lbs with a MultiVolt battery attached
- Standard accessories include10" 40-T Carbide Tipped Blade, blade guard assembly, anti-kickback pawl assembly, miter gauge assembly, push stick, rip fence assembly, VIC rip fence assembly, out feed support assembly, (2) blade wrenches, 4mm hex bar wrench and 2.5mm hex key
- Accepts a MultiVolt battery that delivers 4.0Ah of runtime at 36V in MultiVolt tools (sold separately)
- Battery can also power Hitachi or Metabo HPT 18V slide type tools, including cordless nailers generating an impressive 8.0Ah of run time for increased flexibility and multipurpose use
- With a 36V MultiVolt battery it's never been easier to tackle any job, anywhere, with the power you need
- Higher capacity battery cell technology with 21700 cells that deliver over 1,440W of power- roughly 46% more capacity than a standard 18650 cell battery resulting in longer runtime and increased power output
- 4-Stage fuel gauge located on the face of the battery to make it easier to monitor the charge status
- MultiVolt battery pack is compact and lightweight at only 2.1lbs, eliminating and added bulkiness or weight
- Multiplex Protection Circuit in the battery, communicates with the tool and charger preventing from over-load, over-charge and over-discharge to improve safety and ensure a long battery life
- MultiVolt battery charges in 52 minutes using the UC18YSL3M charger (sold separately)
- Charger has a built-in USB port that can charge USB enabled devices
- Charger will also charge Hitachi and Metabo HPT 18V slide type batteries in addition to MultiVolt batteries
- Insert the 36V MultiVolt battery when cordless portability suits the application or plug in to a power source and save the battery to get conventional corded use of a MultiVolt tool with the MultiVolt AC Adapter ET36A (sold separately)
- With a 36V MultiVolt battery, it's never been easier to tackle any job, anywhere with the power you need
Metabo HPT 36V MV Brushless 10" Table Saw Specifications:
- Voltage: 36V
- Battery Type: 36V Lithium Ion Slide-Type
- Battery Amp Hour: 4.0Ah
- Battery Included: 0
- 36V MultiVolt AC Adapter: Compatible (Not Included)
- Blade: 10-in x 5/8"
- Motor: 36V DC Brushless
- No-Load Speed- Low: 5,000 RPM
- Ambient Operating Temp Range: 14 Degree F to 104 Degree F
- Blade Body Thickness: 1.6mm
- Blade Kerf Range: 2.3 - 2.5 mm
- Riving Knife Thickness: 2mm
- Bevel Range: 0-45 Degrees
- Miter Gauge Range: 60 Degrees Right or Left
- Working Table Size: 28-3/4" x 22"
- Outfeed Support Range: 28-3/4" x 2"
- Depth of Cut at 0 Degrees: 3-1/8"
- Depth of Cut at 45 Degrees: 2-1/4"
- Max Rip to Left of Blade: 22"
- Max Rip to Right of Blade: 35"
- Max Width of Dado: 3/16"
- Power Supply Type: MultiVolt Battery Model BSL36B18, AC/DC Adapter Model ET36A
- Warranty - Tool Body: 2-Year
Metabo HPT C3610DRJQ4M Includes:
- 10" 40T Carbide Tipped Blade (374702)
- Blade Guard Assembly (374766)
- Anti-Kickback Pawl Assembly (374767)
- Miter Gauge Assembly (374768)
- Push Stick (371532)
- Rip Fence Assembly (374764)
- VIC Rip Fence Assembly (374763)
- Out Feed Support Assembly (374765)
- (2) Blade Wrench (374718)
- 4mm Hex Bar Wrench (371645)
- 2.5mm Hex Key (371646)
Model# | C3610DRJQ4M |
---|---|
Brand | Metabo HPT |
Log In