Edwards IW55-3P230 55 Ton Ironworker - 3PH, 230v
The Edwards 55 Ton JAWS Ironworker is well suited to fit the needs of any fab shop, large or small. Standard features include a Punch Assembly with Pedestal Die Table, Flat Bar Shear, Angle Shear and a universal open tooling station designed to accept optional Tooling Accessories. The optional Hydraulic Accessory Pack allows your Ironworker to act as a power source to our expanding line of innovative Hydraulic Accessory Tools, such as the 10 Ton Tube/Pipe Bender, 20 Ton Shop Press and 40 Ton Shop Press.
This item may qualify for an upto 10% OFF further discount. Check Eligibility.
Edwards IW55-3P230 55 Ton Ironworker Features:
- Our Best Seller
- Four Available Workstations
- Universal Open Tooling Station
- Electric Stroke Control
- ANSI B11.5-1988R(02) Compliant
- ETL/UL Approved Controls
Edwards IW55-3P230 Specifications:
Punch
- Rating: 55 Tons
- Max. Capacity: 1-1/16" Dia. in 5/8" A36
- (65,000 PSI Tensile): Stroke
- 1-1/4": Throat Depth
- 7-1/2": Open Height
- 8-1/8": Shut Height
- 6-7/8": Work Height
- 36-9/16": NOTCHER
Open Station
- Throat Depth: 11-3/16"
- Open Height: b
- Shut Height: 6-7/8"
- Stroke: 1-1/4"
- Work Height: 34-1/2"
Flat Bar Shear
- Max. Capacity: 3/8" x 14", 1/2" x 12", 3/4" x 4"
- Max. Round: 7/8"
- Max. Square: 7/8"
- Work Height: 34-1/2"
Angle Shear
- Max. Capacity: 3" x 3" x 3/8", 4" x 4" x 1/4"
- Work Height: 39-7/8"
Optional Coper Notcher
- Max. Capacity: 2-1/2" x 4" x 5/16"
- Work Height: 39-1/2"
General Specifications
- Standard Motor: 5 HP 3~ 208 V or 230 V, 1725 RPM 14 A
- Optional Motors: 5 HP 3~ 460 V, 1725 RPM 7 A, 5 HP 3~ 575 V, 1725 RPM 6 A, 5 HP 1~ 230 V, 1725 RPM 23 A
- Hydraulic Pump: 3-1/2 GPM - 1 Stage
- Valve Pressure: 2500 PSI
- Reservoir: 7 Gallons
- Cylinder: 2-1/2" Ram
Model# | IW55-3P230 |
---|---|
Apply Add To Quote | Yes |
Brand | Edwards |
Log In