Jet 892452 E-1440VS With Taper Attachment and Collet Closer

Features:

• Electromagnetic assisted foot brake for rapid braking
• Inverter drive system provides infinitely variable spindle speeds
• Steady and follow rest feature double sealed ball bearing guides for smooth material movements
• Chuck guards are standard equipment on all ELITE lathes for increased safety
• Front facing chip pan allows easy chip removal from the front of the machine
• 1-1/2" Spindle Bore
• Two speed gearbox allows low speeds from 40-365 RPM to high speeds from 165-2000 RPM
• Hardened and ground gears in headstock reduce vibration and deflection
• Class 7 precision taper roller bearings keep spindle run out to a maximum of 0.0004
• Fully lit with CNC style lighting, the enclosed full length splash guard is expertly designed to contain all chips and coolant
• Overload clutch at feed shaft prevents the carriage from crashing into the chuck
• Certified Meehanite® castings retain their tolerances and remain rigid through many years of machining
• Heavy-duty stand with full length foot brake
• LED RPM readout allows for precise turning speeds
• For added safety, the E-1440VS Lathe follows strict guidelines and electrical requirements to be certified by CSA Group

Standard Equipments:

• 6" 3-Jaw chuck
• 10" Faceplate for 12" Lathes
• 12" Faceplate for 13 & 14" Lathes
• Steady Rest-Ball Bearing
• Follow Rest- Ball Bearing
• 4-Way Tool Post
• Chuck Guard
• 4-Position Carriage Stop
• Threading Dial
• Coolant System
• Center Sleeve
• Dead Center
• Leveling Pads
• Tool Box With Tools

Specifications:

Size: 14 x 40
Accessory: 1 Taper Attachment
Accessory: 2 Collet Closer
Swing Over Bed (In.): 14
Swing Over Cross Slide (In.): 8-5/8
Swing Through Gap (In.): 20
Length of Gap (In.): 9
Distance Between Centers (In.): 40
Spindle Bore (In.): 1-1/2
Spindle Mount: D1-4
Spindle Taper with Sleeve: MT-5
Number of Spindle Speeds: Variable
Range of Spindle Speeds (RPM): 0 - 2,200
Number of Longitudinal and Cross Feed Rates: 80
Range of Longitudinal Feeds (IPR): 0.0012 - 0.0294
Range of Cross Feeds (IPR): 0.0003 - 0.01
Number of Inch Threads: 40
Range of Inch Threads (TPI): 4 - 112
Number of Metric Threads: 22
Range of Metric Threads: 0.45 - 7.5
Max Tool Size (In.): 7/8 x 7/8
Compound Slide Travel (In.): 4
Cross Slide Travel (In.): 7
Tailstock Spindle Travel (In.): 4-3/4
Taper in Tailstock Spindle: MT-3
Follow Rest Capacity (In.): 1/4 - 2-3/8
Steady Rest Capacity (In.): 1/4 - 2-3/4
Width of Bed (In.): 8-1/2
Motor (HP): 3 HP, 230V, 3Ph
Ampearge Draw @ 230V 3Ph: 9
Coolant Pump Motor: 1/8 HP
Weight (Lbs.): 1653
Overall Dimensions (L x W x H) (In.): 77 x 30 x 58
Drive: EVS
Style (Type): ELITE EVS