Klein Tools NCVT 6 Volt Tester with Laser Distance Meter
The Klein Tools NCVT-6 is a non-contact voltage tester (NCVT) with an integrated laser distance meter. It can detect voltage over the full-range from 12 to 1000 VAC and can measure distances from 2-Inch (51 mm) up to 66-Feet (20 m). The laser distance meter functions independently from the NCVT with a simple-to-use intuitive interface. Easy, single-button changes between voltage detection and laser distance measurements.
Free Shipping
$51.47
Model# NCVT-6
SKU
092644692253
Features:
- Non-contact Tester determines AC voltage in cables, cords, circuit breakers, switches, outlets, wires, as well as security, entertainment, communications, environmental control, and irrigation systems
- Volt Pen detects AC voltage from 12 to 1000V with visual and audible indicators
- Incorporates a 66-Foot (20 m) Laser Distance Meter that can measure in meters, inches in fractions or decimals, and feet in fractions or decimals, with accuracy up to 1/16-Inch (0.16 cm)
- High-visibility reverse contrast display for better viewing in low light conditions
- Laser Class II, 630 to 670nm, Max. Power <1mW
- Simple-to-use intuitive interface; easy single-button changes between laser distance measurements and voltage detection
- Delivers simultaneous visual and audible voltage indicators when AC voltage is detected
- Audible voltage indicator beeps at a greater frequency the higher the voltage that is sensed, or the closer to the voltage source
- Built to withstand a 6.6-Foot (2 m) drop
- Auto Power-Off conserves and extends battery life
- Screw-thread battery cap
- Lightweight tool with pocket clip for easy everyday carrying and storage
- CAT IV 1000V safety rating
- Ingress Protection IP40 Dust Resistant
- Under normal operating conditions, at distances from 2-Inch to 32.8-Foot the NCVT-6 has an accuracy of +/- 1/16-Inch; and at distances greater than 32.8-Foot up to 65.6-Foot, accuracy of +/- 1/8-Inch
Specifications:
- Type: Non-Contact Voltage Tester
- Application: Non-Contact Detection and Testing of AC Voltage with Integrated Laser Distance Meter
- Special Features: Laser Distance Measuring, Laser Pointer, Reverse Contrast LCD, LED and Audible Beep Indications, Auto-Power Off, Pocket Clip
- Material: Plastic and Electronic Assemblies
- Drop Protection: 6.6' (2 m)
- Voltage: 12-1000V AC
- Frequency: 50 - 500 Hz
- Accuracy: 1/16'' from 2'' to 32.8'; 1/8'' from 32.8' to 65.6'
- Pollution Degree: 2
- Ingress Protection: IP40 Dust Resistant
- Standard: CATIV 1000V, Laser: Class II, 630nm to 670nm, Max. Power <1mW
- Included: NCVT; 2 x Alkaline 1.5V AAA Batteries
- Batteries: 2 x AAA
- Overall Length: 6.45'' (16.4 cm)
- Overall Height: 1.32'' (3.4 cm)
- Overall Width: 1.21'' (3.1 cm)
- Weight: 2.5 oz (72 g)
| Model# | NCVT-6 |
|---|---|
| Brand | Klein Tools |
Log In