SNAPLOC 6622006 1/2 Inch PVC Pipe Repair Tee with 1/2 Inch Threaded Riser
SNAPLOC 6622006 1/2 Inch PVC Pipe Repair Tee with 1/2 Inch Threaded Riser.
The easiest and fastest pipe repair solution in the market. With this repair tee, you can easily install an outlet for a sprinkler in any area in your lawn. Just make a “V” hole, prime, glue, snap, and twist! Save time, money, and effort by obtaining easy and durable water-tight permanent seal results.
Features:
- Unique Positive snapping-lock-design assures permanent seal
- Water tight permanent seal
- Easiest and fastest way to install a fitting for any sprinkler installation
- Fastest way for landscaping professionals to install sprinklers. No longer need to stop and measure each fitting for each sprinkler. Just install all the pipe layout and quickly install this fitting for each sprinkler location.
- For 1/2" PVC SCH 40 Pipes
- Less digging to fix a broken pipe
Free Shipping
$11.16
Model# 6622006
SKU
048366220069
Installation Instructions:
- Make sure the water supply is turned off. Clean & dry the broken area of the pipe.
- Cut an approximately 3/8” wide “V” on top side of the PVC pipe. Apply the primer to the inside of the SNAPLOC fittings and to the broken pipe. Generously apply PVC Cement / Glue to the inside of the SNAPLOC fitting and to the broken pipe.
- Snap the fittings over the pipe, squeeze it tight and rotate it back and forth until snug. Hold it for at least 30 seconds making sure that the TWO halves of the fittings are properly seated.
- Allow 15 minutes for inner surfaces to form a watertight seal.
Note: Do not use old PVC Cement. Use a new one to get perfect results.
| Model# | 6622006 |
|---|---|
| Brand | SnapLoc |
| CA Prop 65 |
Log In